Mitsubishi Pajero Accessories

Headlamp Protectors

Designed to follow the contours of the Pajero headlamps, the protectors are constructed of heavy-duty acrylic and deflect flying stones. Perfect for use on country roads and freeways. Easily removed and reattached for cleaning. Sold as a set of 2 to suit left and right headlamps.

Bonnet Protector - Tinted or Clear

The Pajero clip on Bonnet Protector is constructed of heavy duty acrylic and deflects flying stones that could damage the bonnet. Ideal for country driving where damage is most likely to occur. The Genuine Bonnet Protector is easily removed and reattached for cleaning. Available in Clear or Tinted finish .

Weathershields

These Weather shields deter rain and run-off water and wind noise from entering the cabin. This allows you to drive with your window slightly open during rainy conditions without the fear of water coming into the cabin.

Alloy Front Protection

The Genuine Alloy Front Protection Bar replaces the original bumper and has been specifically designed and engineered to meet Mitsubishi Motors stringent safety standards and is fully airbag compatible. The Alloy Front Protection Bar integrates with Pajero’s styling and has been rigorously tested to ensure sufficient ventilation to the engine for cooling. It will help protect you, your passengers and your vehicle in an accident. In addition the pre-formatted mounting points are featured to suit the Pajero’s Driving Lights. The Alloy Front Protection Bar complies with Australian Standard AS4876.1-2002 for improved safety performance. Available to suit all Pajero models.

Steel Front Protection Bar

The Genuine Steel Front Protection Bar is manufactured from pressed steel components and replaces the original bumper and has been specifically designed and engineered to meet Mitsubishi Motors stringent safety standards and is fully airbag compatible. The Alloy Front Protection Bar integrates with Pajero’s styling and has been rigorously tested to ensure sufficient ventilation to the engine for cooling. It will help protect you, your passengers and your vehicle in an accident. In addition the pre-formatted mounting points are featured to suit the Pajero’s Driving Lights. The Alloy Front Protection Bar complies with Australian Standard AS4876.1-2002 for improved safety performance. Available to suit all Pajero models.

Alloy Nudge Bar

The Genuine Alloy Nudge Bar has been specifically designed to suit the Pajero and is fully airbag compatible and tested to comply with Australian Design Rules and Standards. The Nudge Bar attaches to the front bumper and the large tubular polished design helps protect the Pajero in accident. It features pre-formatted mounting points to suit the Driving Lights and has been designed not to interfere with the front towing hooks or headlamps and indicators. The mounting system has also been engineered to reduce vibrations.

Driving Lights

Good lighting allows you to safely cover long distances at night. The mid-size 170 STRIKER™ outperforms many larger lights and its compact size makes it an easy install on selected Mitsubishi vehicles. With a set of COMBO or SPREAD filters, it is incredibly versatile, creating an ideal peripheral light pattern. These filters are available in different light colours for varying terrain and weather conditions. Made from polycarbonate and glass filled nylon, Lightforce lights are durable and lightweight, are protected from dust, rust and water ingress, and can withstand an extreme battering.

Rear Spare Wheel Lifter

For towing with your Pajero, this unique accessory lifts the mounting point of the spare wheel mounted on the rear tailgate to provide additional clearance for towing equipment that requires additional height over the towbar. Note: The upper section of the standard wheel cover is removed when the accessory spare wheel lifter is fitted.

Vinyl Spare Wheel Cover

The Spare Wheel Cover is made from durable vinyl and easily slips over the spare wheel, protecting your wheel from the elements. The Spare Wheel Cover is easily removed for cleaning.

Chrome Door Edge Moulding

The Chrome Door Edge Moulding provides a classy touch to Pajero’s side styling and protects your door edges from unsightly paint chips and scratches. Sold as a set of 4 to suit front and rear doors.

Chrome Door Handle Protectors

The Genuine Chrome Door Handles protect the Pajero’s paintwork from scuff marks caused by rings and keys. The Chrome Door Handles also add an element of class.
Front and Rear pairs sold separately to suit left and right doors. The Genuine Chrome Door Handles protect the Pajero’s paintwork from scuff marks caused by rings and keys. The Chrome Door Handles also add an element of class.

Front and Rear pairs sold separately to suit left and right doors.

Towbar

The Genuine Towbar has been engineered specifically for Pajero to ensure maximum performance. Included with the towbar is the tongue, wiring harness and 7-pin flat plug. The Genuine Towbar features a towing capacity of 3,000kg with a tow ball download of 180kg. Alternate towing capacity of 2,500kg with a tow ball download of 250kg is also permissible for higher tow ball downloads. Maximum tow ball download capacity of 180kg for trailers weighing between 2,501kg to 3,000kg. Note: The Genuine towbar harness is designed to disable the accessory Rear Parking Assist Sensors from providing assistance when reversing. Factory fitted reverse parking assist requires the use of the sonar disable button when reversing. Genuine Accessory Chrome Towball, Chrome Towball Cover, Towbar Hitch Cover Plate and 12-pin flat plug are available separately.

Chrome Towball

A Towbar is not complete without a Towball. Mitsubishi offers a Genuine 50mm Chrome Towball to suit the Pajero Towbar package.

Weight Distribution Hitch

The Genuine Weight Distribution Hitch delivers greater stability when towing heavy loads and giving you peace of mind with added safety, improved steering and reduced tyre wear.

Chrome Towball Cover - 50mm

The perfect item to complete the look of your Towbar and Towball, the Chrome Towball Cover - 50mm protects your Towball against external elements.

Towbar Hitch Cover Plate

Offers protection to the hitch receiver when the towbar tongue has been removed.

12-Pin flat Pin plug

The Genuine 12-Pin Flat Pin Plug is required when the trailer is equipped with 12-Pin plug. Furthermore the 12-Pin Plug integrates with the Genuine Accessory Reverse parking Assist Sensors.

Rear Parking Assist Sensors

Rear Parking Assist is designed to marking parking easier as this emits a series of audible beeps indicating how close the Pajero is to an external object.

Rear Dust Deflector

This stylish accessory is constructed from durable acrylic and mounts at the top of the tailgate and prevents build-up of dust and dirt that can build up on the rear window. This is especially useful for owners who live in regional and rural areas that traverse dirt roads. The Rear Dust Deflector is easily removed and reattached for cleaning. Not compatible when the Rear Spoiler is fitted.

Side Step Illumination

The Side Step Illumination is a stylish Genuine accessory designed to make it easier to see the Side Steps at night. Side Step Illumination is designed to suit Genuine sidesteps.

Alloy Wheel Lock Nut Set

Alloy Wheel Lock Nuts help protect your alloy wheels from theft, as the lock nut can only be loosened with a unique key. Note: Sold as a set of 4 to suit Pajero’s alloy wheels.

Safety Warning Triangle

This is a useful accessory to provide advance warning to other motorists of a hazard in case of an emergency or roadside breakdown.

Sports Roof Rack Cross Bars

The Sports Roof Rack is engineered to Mitsubishi Motors stringent design standards. Aerodynamically designed to reduce wind noise and constructed of anodised extruded aluminium, the Sports Rook Racks are easy to install onto the Pajero roof rails. Carrying capacity is rated at 60kg. When loading the roof using the roof racks, the weight of the accessories must be subtracted from 60kg to determine the available carrying capacity of the roof rack.

Roof Rack Cross Bars

Maximum carrying capacity of the Roof Rack Cross Bars is 75kg in total. When loading the roof the weight of the rack racks and accessories must be subtracted from 75kg to determine the available carrying capacity on the rack. The Roof Rack Cross Bars includes a foot pack, bar pack and fitting kit.

Cargo Tie Down

An ideal accessory to use with the THULE Roof Racks, these are sold as a set of 2 strong straps to help mount your skis, watercraft, bike or other item to any of the numerous carriers. Weight: 1kg

THULE Bike Carrier

The Roof Bike Carrier works perfectly with the Roof Rack Cross Bars to make carrying your bike safe and easy. Weight: 5kg. • Excludes Bicycle and Water Craft as displayed.

THULE Ski Carrier

Ideal for transporting skis or snowboards. The Ski Carrier works perfectly with the Roof Rack Cross Bars to make carrying your skis safe and easy. Weight: 4kg. Excludes Ski Equipment as displayed.

THULE Water Craft

The Water Craft Carrier works perfectly with the Roof Rack Cross Bars to make transporting your water craft safe and easy. Weight: 25kg. Excludes Water Craft and Bicycle as displayed.

THULE Luggage Carrier

The perfect accessory for transporting bulky items. Weight: 13kg

THULE Luggage Net

This accessory has been designed specifically to prevent loose items in the rear of the Pajero from moving around. The net clips to existing anchorage points in the cargo area of the Pajero.

THULE Touring Luggage Pods

The roof box carrier is not only practical, but adds a stylish look and feel to the Pajero. Designed for reducing air resistance, wind noise and vibrations, the roof box can be opened from both sides for convenience and is equipped with the Fast-Click quick-mount solution. For easy and secure fixation the touring range is equipped with the integrated torque indicator. And for maximum safety and theft protection the Touring range has several locking points, and the grip-friendly key cannot be removed unless they are all securely closed. Available in four sizes and with a load capacity of 50kg.

THULE Motion Luggage Pods

The roof box carrier is optimised for best use of space efficiency. For convenience the roof box can be opened from both sides and is equipped with the Power-Click quick mounting system with integrated torque indicator for easy and secure fixation with a single hand grip. The patented Dual-Force spring system and outside handles guarantee a convenient opening and closing. Available in three sizes and with a load capacity of 75kg.

Cargo Barrier

Cargo This practical accessory has been engineered to withstand the severe impact of a loose projectile that may be thrown forward in the event of strong braking or an accident. These loose items may, in certain situations, become missiles that can cause severe injury to the vehicle occupants. Made from impact resistant steel, the Cargo Barrier has mounting points in 2 positions. It has been designed to provide a safe exit from the Cargo Area to avoid entrapment and includes an integrated glass breaker. Note: Also available is a Front Strap Package to allow fitment behind the driver’s seat. Compatible with Side Curtain Airbags when fitted in the Rear Position only.

Cargo Carpet Mat

Designed specifically to suit the rear cargo area contours of Pajero, this mat will improve the look of the Pajero cargo area and safeguard the underlying trim from damage incurred while loading and unloading. The mat features the Pajero insignia.

Hard Plastic Cargo Liner

This practical accessory has been designed to suit the rear cargo area of your Pajero. It is made from sculpted hard plastic and features a raised outer lip to retain mud, sand and loose objects. It is easy to remove and clean. It is available as a two-piece liner that offers protection to the cargo area of your Pajero from the wear and tear of loading and unloading items likely to damage the carpet in the cargo area. The two-piece design means that you can also use just the rear section of the liner with the Pajero’s third row seats folded up. Note: Compatible with the Cargo Barrier.

Luggage Floor Hook

This clever accessory provides additional secure hooking and mounting platform from which to secure items to Pajero’s luggage room floor. It has been designed to Mitsubishi’s stringent standards and complies with all the relevant Australian Design Rules.

Cargo Net

This accessory has been designed specifically to prevent loose items in the rear of the Pajero from moving around. The net clips to existing anchorage points in the cargo area of your Pajero.

Neoprene Seat Covers

Available in individual sets to suit the front, second and third row seats of Pajeros, these genuine seat covers are made of neoprene. They simply slide over the seats – without any tie downs – making them easy to remove for cleaning! They will help keep your seats looking new by protecting them from those day to day scuffs, dirt and accidental spillages. Note: Available separately to suit front, second and third row seats. The Centre Armrest on the second row seat is covered by the seat cover when fitted. Airbag compatible.

Rubber Mats

Mitsubishi Motors Genuine Rubber Mats are specifically designed to follow Pajero’s floor line contours and feature an anti-slip design for absolute safety. They are the perfect accessory in keeping your footwells clean and can be easily removed for cleaning. Available as a set of front and rear mats.

Carpet Mats

Genuine Embodied Carpet Mats are designed specifically for the footwells of the Pajero and improve the look of the interior and help keep the footwells clean. The Carpet Mats are embroidered with the Pajero insignia and feature an anti0-slip design for absolute safety. Available as a set of front and rear mats.

Dash Mats

Mitsubishi Motors Genuine Dash Mat is designed to suit the contours of Pajero’s instrument panel and also protects it from the harsh effects of the sun. It is made from carpet and features a moulded backing to allow for a perfectly integrated fit.

Scuff Plates

The stylish and attractive Outer Scuff Plates are manufactured from brushed stainless stall and feature embossed Pajero. They are designed to protect Pajero’s front door sills from scratches and rub marks that are inevitable from everyday wear. Available as a set for left and right front doors.

Illuminated Scuff Plates

The stylish and attractive Outer Scuff Plates are manufactured from brushed stainless stall and feature embossed Pajero. They are designed to protect Pajero’s front door sills from scratches and rub marks that are inevitable from everyday wear.
Available as a set for left and right front doors.

Alloy Look Sports Pedals

Give your Pajero a sporty look with these Sports Pedal Covers.
Available to suit both manual and auto models.

Boot Flap Scuff Guard

This handy accessory protects your Pajero’s paintwork from scuffs, chips, scratches and general wear and tear. It features a velcro strip to secure it to the cargo carpet edge when folded over the cargo area edge. It also folds away easily for storage.
Note: Diamond Spectrum Part.

One-Touch Sunshade

This clever accessory provides relief from the heat and harsh effects of the sun. It has been designed specifically to follow the contours of the Pajero’s windows and clips onto the inner window frames in seconds. The sunshade is made from a material that is highly reflective and features a clever spring mechanism for compact stowage when not in use.